Maple Door Lining rebated with two grooves

Product Code: MAPDL007

More Views

Maple Door Lining rebated with two grooves

Product Code: MAPDL007

From Excl. VAT: £6.00 From Incl. VAT: £7.20

Availability: In stock

Maple Door Lining


Maple Door Lining rebated 15mm * 56 mm with two 15 mm * 4 mm grooves for 54 mm 60 minute fire door.


Order to the nearest metre. Specify door width, height and gap under the door. If the depth of frame is not listed, specify depth. The frame will be supplied rebated, flat pack for site assembly. Our standard groove for 60 minute fire door is two 15 mm grooves. If fire assessment for door set requires a different width for intumescent strip width can be changed.

Additional Information

Material Maple
Lead Time Days 12

* Required Fields

From Excl. VAT: £6.00 From Incl. VAT: £7.20
OR
Total
From Excl. VAT:
From Incl. VAT:
Description

Details

Maple

Maple is eminent for its even tones of light tan or a light red-brown. Fewer knots are present giving this hardwood style. It is medium strength but good for steam-bending. Working with Maple isn’t always easy as it has a tolerable blunting effect; pre-drilling for nails and screws is recommended to keep its quality. This piece of wood can be finished with oil, lacquer, staining, or varnish. Perfect for internal doors, skirtings, architraves, mouldings and specialist joinery. For internal use only.

BOARDLAND FINISHES

Here at Boardland, giving you the perfect finished product is our main goal. We offer a variety of finishes for softwood and hardwood. Please speak to us if you want advice or a further explanation!

UNPRIMED

If you choose your product to come unprimed, it will come to you as the raw product ready for you to finish as you require.

OIL

If you choose your product to have an oil finish, it will come richer in colour with a brighter finish. Oil isn’t the most durable so wouldn’t want to be used in busy areas or on a table/work surface, which requires more cleaning. The process consists of:

  1. The product is enriched with oil by hand, and then left to seep in.
  2. It is then lightly sanded to fill in any pores with the oil and wood dust to create a smoother finish.
  3. Quality checked by our QA manager.

CLEAR LACQUER

If you choose your product to have a clear lacquer finish, it will come with a hard coating with a 30% sheen. This surface is very durable, perfect for lots of use. The process consists of:

  1. The product is sanded ready for polishing.
  2. It is wiped down and 2 coats of lacquer is applied.
  3. Then, it is lightly sanded, which breaks down the grain for a smooth finish.
  4. A further coat of lacquer is applied to seal and create the hard top.
  5. Quality checked by our QA manager.