Steamed Beech Door Lining with two grooves

Product Code: BEEDL003

More Views

Steamed Beech Door Lining with two grooves

Product Code: BEEDL003

From Excl. VAT: £3.00 From Incl. VAT: £3.60

Availability: In stock

Steamed Beech Door Lining


Steamed Beech Door Lining with two 15 mm * 4 mm grooves for 54 mm thick 60 minute fire door.


Order to the nearest metre. Specify door width, height and gap under the door. If the depth of frame is not listed, specify depth. The frame will be supplied haunched, flat pack for site assembly. Our standard groove for 60 minute fire door is two 15 mm grooves. If fire assessment for door set requires a different width for intumescent strip width can be changed.

Additional Information

Material Steamed Beech
Lead Time Days 12

* Required Fields

From Excl. VAT: £3.00 From Incl. VAT: £3.60
OR
Total
From Excl. VAT:
From Incl. VAT:
Description

Details

Steamed Beech

Steamed Beech is often a very pale brown colour but can be prone to darkening with steaming to a pink tone or even red/brown. Consisting of a straight grain with a fine and even texture, well known for its short flecks throughout the wood. It is of medium strength and has a tolerable blunting effect. Pre-drilling for nails and screws is essential to keep a clean finish. Steamed Beech is a naturally nice-looking piece of wood but can be finished with oil, lacquer, staining, or varnish. Perfect for internal doors, skirtings, architraves, mouldings and specialist joinery. For internal and external use.

BOARDLAND FINISHES

Here at Boardland, giving you the perfect finished product is our main goal. We offer a variety of finishes for softwood and hardwood. Please speak to us if you want advice or a further explanation!

UNPRIMED

If you choose your product to come unprimed, it will come to you as the raw product ready for you to finish as you require.

OIL

If you choose your product to have an oil finish, it will come richer in colour with a brighter finish. Oil isn’t the most durable so wouldn’t want to be used in busy areas or on a table/work surface, which requires more cleaning. The process consists of:

  1. The product is enriched with oil by hand, and then left to seep in.
  2. It is then lightly sanded to fill in any pores with the oil and wood dust to create a smoother finish.
  3. Quality checked by our QA manager.

CLEAR LACQUER

If you choose your product to have a clear lacquer finish, it will come with a hard coating with a 30% sheen. This surface is very durable, perfect for lots of use. The process consists of:

  1. The product is sanded ready for polishing.
  2. It is wiped down and 2 coats of lacquer is applied.
  3. Then, it is lightly sanded, which breaks down the grain for a smooth finish.
  4. A further coat of lacquer is applied to seal and create the hard top.
  5. Quality checked by our QA manager.